Minggu, 11 Januari 2009

Inner Chassis

As below a picture says a 1000 words; Ive used 40 x 20mm pine, as it is a soft easy to work with timber; and it will not be in view. I have cut sections to desired lengths that best fit my face plate, around the joystick, button and keywiz components.



I have pre-drilled some holes along the center line of the inner side; forward planning in order to secure the outer side plates (polished hardwood) later on with wood screws.



Aquadere/PVA glue has been used to secure the Pine to the MDF Inner Faceplate; I held the pieces in place to dry with some scissor clamps.

Tidak ada komentar:

Posting Komentar